To determine if internal engine damage is causing no start condition, perform the following steps: ‪ Install a 3/4 in. breaker bar or ratchet and…

Check as follows:‪ Verify that the engine will bar over by hand. If not, check for internal engine damage. Refer to “2.4 Internal Engine Damage” . If…

Check as follows:‪ ENGINE EXHAUST ‪ To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic.‪ Clamp…

Hard starting with external priming source indicates a system that cannot generate the required pressure for the high pressure pump.‪ Using DDL7.0 (latest version), check…

Check as follows:‪ Verify that the engine will bar over by hand. If not, check for internal engine damage. Refer to “2.4 Internal Engine Damage” . If…

Check as follows:‪ Check OEM guidelines to determine the amount of fuel in fuel tank. If fuel is at recommended level, check for a weak…

Complete all other inspections (i.e. battery checks) prior to completing the tasks below.‪ Use DDDL7.0 (latest version) to check for stored or active codes and…

Check as follows:‪ Clean the engine. Start and run the engine to operating temperature 88°C (190°F). Check for leaks at oil lines, connections, mating joints,…

Check as follows:‪ Check first for external oil leaks. Refer to “4.2 External Oil Leaks” . If no external leaks are found, go to the next step.…