Motor Control Module
The MCM is located on the left-hand side of the engine.
The MCM processes the data received from the CPC, for example the position of the accelerator pedal, engine brake, etc.
This data is evaluated together with the data from the sensors on the engine, such as coolant and fuel temperature and oil and charge pressure. The data is then compared to the characteristic maps or lines stored in the MCM.
From this data, quantity and timing of injection are calculated.
Note: To obtain a replacement MCM, all the information given on the MCM label is required.
The MCM data label has the 10 digit engine serial number.
| EPA07 DD15 Operator’s Guide – DDC-SVC-MAN-0003 |
| Generated on 10-13-2008 |
