Series 60 Fuel Pro 380E Fuel Processor Assembly

The Fuel Pro ® 380/380E diesel fuel filter system is used in place of a separate spin-on primary fuel filter.  This system uses a high efficiency five-micron fuel filter element which requires replacement when the fuel level in the see-through filter cover reaches the top of the element or after one year of service, whichever comes first. ‪

The Fuel Pro 380/380E diesel fuel filter system consists of the following: ‪

  • A permanently mounted fuel processor
  • A replaceable five-micron filter element and sealing grommet assembly
  • A filter spring
  • A see-through filter cover and O-ring seal
  • A cover locking collar
  • A cover vent cap and seal

The Fuel Pro 380E system also includes the following: ‪

  • A fuel heater element
  • A thermostat switch
  • A wiring harness
1. Collar ‪ 7. Filter Element ‪
2. Vent Cap ‪ 8. Filter Seal Grommet (Part of Element) ‪
3. Vent Cap Seal ‪ 9. Wiring Harness (380E System Only) ‪
4. Spring (Part of Cover) ‪ 10. Check Valve and Thermostat ‪
5. Cover ‪ 11. Fuel Processor Assembly ‪
6. Cover Seal ‪ 12. Drain Valve

One Reply to “Series 60 Fuel Pro 380E Fuel Processor Assembly”

Leave a Reply

Your email address will not be published. Required fields are marked *