Series 60 Lubricating Oil Pump Parts

The drive gear is pressed on the drive shaft, which is supported inside the housing on two bushings. The driven gear is pressed on the driven gear shaft, which is supported inside the housing on two bushings. ‪

1. Bolt ‪ 12. Oil Pump Outlet Tube ‪
2. Bracket ‪ 13. Spring Seat ‪
3. Gasket ‪ 14. Spring ‪
4. Bushing ‪ 15. Relief Valve ‪
5. Drive Shaft and Gear Assembly ‪ 16. Pin ‪
6. Dowel ‪ 17. Relief Valve Housing ‪
7. Gear ‪ 18. Oil Pump Outlet Elbow ‪
8. Oil Pump Body ‪ 19. Nut ‪
9. Shim ‪ 20. Washer ‪
10. Oil Pump Housing Cover ‪ 21. Tube and Screen Assembly ‪
11. Seal Ring ‪ 22. Driven Shaft and Gear Assembly

Leave a Reply

Your email address will not be published. Required fields are marked *