Series 60 – SPN 1845 (CPC) – J1939 TCFG2 MESSAGE IS MISSING

89.1 SPN 1845/FMI 9
This fault is typically the J1939 TCFG2 message is missing.

Missing TCFG2 Message Check
Check as follows:

1. Check for multiple codes:
[a] If CPC SPN 168/FMI 0/14/18 (Battery Voltage) are present troubleshoot these first.
[b] If MCM SPN 625/FMI 9 is present, troubleshoot and repair the CAN line.
[c] If only a “J1939 Error” fault is present, go to step 2.

2. Has the CPC been recently reprogrammed?
[a] If yes, check the proper configuration of the CPC.
[b] If no, connect ServiceLink to determine which modules are configured for the vehicle and their communication status. Once this is done, follow the appropriate module communication troubleshooting procedures for the affected module.

Leave a Reply

Your email address will not be published. Required fields are marked *