74.1 SPN 713/FMI 3
TOP2 Lockout Solenoid – indicates a short to power on the pin 7 circuit of the CPC #3 connector.
For wiring schematic information refer to OEM literature.
NOTE:
The CPC digital outputs have the same SPN as some MCM faults. DDDL 7.0 makes the
distinction between the MCM and CPC when diagnosing a fault.
74.2 SPN 713/FMI 4
TOP2 Lockout Solenoid – indicates a short to ground circuit on pin 7 of the CPC #3 connector.
For wiring schematic information refer to OEM literature.
NOTE:
The CPC digital outputs have the same SPN as some MCM faults. DDDL 7.0 makes the
distinction between the MCM and CPC when diagnosing a fault.
74.3 SPN 713/FMI 5
TOP2 Lockout Solenoid – indicates an open circuit on the pin 7 circuit of the CPC #3 connector.
For wiring schematic information refer to OEM literature.
NOTE:
The CPC digital outputs have the same SPN as some MCM faults. DDDL 7.0 makes the
distinction between the MCM and CPC when diagnosing a fault.
74.4 SPN 713/FMI 7
TOP2 Shift Failure – indicates an open, ground or shot to power on the pin 7 of the CPC #3
connector. For wiring schematic information refer to OEM literature.
NOTE:
The CPC digital outputs have the same SPN as some MCM faults. DDDL 7.0 makes the
distinction between the MCM and CPC when diagnosing a fault.
