Posted on by

Series 60 Turbocharger Oil Lines

Oil for lubricating the turbocharger is supplied under pressure through an external oil line extending from the oil filter adaptor to the top of the center housing.

1. Elbow, Oil Drain Tube ‪ 10. Connector, Oil Supply Tube ‪
2. Bolt, Mounting Bracket ‪ 11. Tube Assembly, Turbo Oil Supply ‪
3. Bolt, Oil Drain Tube Clip ‪ 12. Clip, Oil Supply Tube ‪
4. Tube, Turbo Oil Drain ‪ 13. Bolt, Oil Supply Tube Clip ‪
5. Bolt, Oil Drain Tube Mounting ‪ 14. Connector, Oil Supply Tube (to turbocharger) ‪
6. Gasket, Turbo Oil Drain Tube ‪ 15. Gasket, Turbo Exhaust Inlet ‪
7. Nut, Turbo Mounting ‪ 16. Clip, Oil Drain Tube ‪
8. Washer, Turbo Mounting ‪ 17. Bracket, Oil Drain Tube Clip Mounting ‪
9. Turbocharger Assembly ‪ 18. Nut, Oil Drain Tube Clip

Related Posts

  • Series 60 Turbocharger Oil Flow Diagram

    From the oil inlet in the center housing, the oil flows through the drilled oil passages in the housing to…

  • Series 60 TMF Turbocharger

    The TMF turbocharger is used on 1990 and later 12.7 liter displacement engines, except heat exchanger-cooled pleasure craft marine engines.

  • Series 60 Turbocharger

    The turbocharger is designed to increase the overall power and efficiency of the engine. Power to drive the turbocharger is…

  • Series 60 Defective Turbocharger

    To determine if a defective turbocharger is causing excessive oil consumption, perform the following: ‪ 1. Remove the turbocharger drain…

  • Series 60 External Oil Leaks

    To determine if oil leaks are causing excessive oil consumption, perform the following: 1. Start and run the engine to…

Published by sam

One Reply to “Series 60 Turbocharger Oil Lines”

Leave a Reply

Your email address will not be published. Required fields are marked *