Email This Page Stop Engine Override Option The Stop Engine Override Option is used for a momentary override. The Motor Control Module (MCM) will record…
Category: DD15 Operator Guide
Email This Page Emergency Running Mode The engine is equipped with DDEC VI which monitors the engine as it is running. As soon as a fault…
Email This Page Shutting Down the Engine If the engine has been running at full output or the coolant temperature has been high, allow the…
Email This Page Changing the Idle Speed The idle speed range of the DD15 engine is 600 to 900 rpm if the parameters in the…
Email This Page Monitoring Engine Operation While the engine is operating, monitor the battery charge indicator light, the oil pressure and avoid excessive idling. Battery…
Email This Page Routine Engine Start Following are procedures for a routine everyday engine start. ENGINE EXHAUST To avoid injury from inhaling engine exhaust,…
Email This Page Emergency Jump Starting The DDEC VI system operates on 12 volts DC. If a DDEC VI engine with an electric starting motor requires emergency…
Email This Page Stopping the Engine Stop an engine under normal operating conditions as follows: Reduce engine speed to idle and put all shift levers…
Email This Page Running the Engine While the engine is operating, monitor the battery charge indicator light, the oil pressure, and avoid excessive idling. One…
Email This Page System Checks Perform the following system checks before starting for the first time. Cooling System Checks Check the cooling system as follows:…