Email This Page DDEC VI Features DDEC VI offers a variety of features and options designed to warn the operator of an engine malfunction.‪ Options…

Email This Page Common Powertrain Controller The CPC communicates with the MCM unit installed on the vehicle over the J1939 datalink. ‪ Data for specific…

Email This Page Motor Control Module The MCM is located on the left-hand side of the engine.‪ The MCM processes the data received from the…

Email This Page Cold Weather Operation Special precautions must be taken during cold weather. To protect your engine, special cold weather handling is required for…

Email This Page Stop Engine Override Option The Stop Engine Override Option is used for a momentary override. The Motor Control Module (MCM) will record…

Email This Page Emergency Running Mode The engine is equipped with DDEC VI which monitors the engine as it is running.‪ As soon as a fault…

Email This Page Shutting Down the Engine If the engine has been running at full output or the coolant temperature has been high, allow the…

Email This Page Changing the Idle Speed The idle speed range of the DD15 engine is 600 to 900 rpm if the parameters in the…

Email This Page Monitoring Engine Operation While the engine is operating, monitor the battery charge indicator light, the oil pressure and avoid excessive idling.‪ Battery…

Email This Page Routine Engine Start Following are procedures for a routine everyday engine start.‪ ENGINE EXHAUST ‪ To avoid injury from inhaling engine exhaust,…