The tachometer drive is driven off the head of the camshaft drive gear retaining bolt, which must be of the slotted configuration, and mates with…
Category: Series 60
The Series 60 engine can be configured with or without a mechanical tachometer drive. A camshaft drive gear access cover mounted to the gear case…
The cranking circuit may contain a key start switch or push switch (or both), a relay, magnetic switches, solenoids, oil pressure switch, fuel pressure switch,…
When the cranking circuit is closed, a drive pinion on the armature shaft engages with the teeth on the engine flywheel ring gear to crank…
The cranking motor is bolted to the flywheel housing.
1. Alternator Bracket 2. Bolts 3. Tensioner
Detroit Diesel has released a new alternator mounting bracket for the Series 60 2002 Engine, mounting bolt torque specifications remain standard. 1. Bolts 2.…
The battery charging alternator provides a source of electrical current for maintaining the storage battery in a charged condition and supplies sufficient current to carry…
Exhaust manifolds on Series 60G automotive engines and on Series 60 keeled-cooled marine engines have an insulation wrap to contain heat. One-piece exhaust manifolds on…
Three-Piece Exhaust Manifold: A three-piece, cast-iron exhaust manifold is attached to the cylinder head with twelve special alloy hardened bolts. The manifold has a square…