The cooling system consists of the following components: Water pump Pressure control cap Thermostat Engine cooling fan Coolant filter and conditioner Radiator or heat exchanger…
Category: Series 60
The lubrication system consists of the following components: Oil pump Pressure regulator valve Pressure relief valve Oil filters Oil filter adaptor Oil cooler Oil…
The former fuel pump system consists of the following components: Barnes positive displacement type fuel pump; separate drive shaft Air compressor drive hub Gear…
Engine models built after December 1, 2003 will use the N3 Electronic Unit Injector (EUI). The N3 injector is designed as an inline concept. The fuel…
The Electronic Unit Injector (EUI) is a lightweight, compact unit that injects diesel fuel directly into the combustion chamber. The amount of fuel injected and…
The fuel system includes injectors, integral fuel manifold in the cylinder head, fuel pump, a cooling plate for the Electronic Control Module (ECM) or Electronic…
The nested roller follower type rocker arms transmit cam motion directly to the valves. 1. Roller Follower 3. Exhaust Valve Rocker Arm 2.…
The Series 60 cylinder head combines intake and exhaust valve porting and fuel injector seats with water jacketing to cool the ports, injectors and combustion…
The integral oil galleries direct the oil pump output through the external oil cooler and filters, to the main oil gallery and to drilled passages…
An integral coolant inlet manifold is cored into the right side of the block. It distributes the water pump output along the length of the…