Description of SID 232 – Accelerator Pedal Supply Voltage Fault
SID 232 indicates that a fault has occurred in the supply voltage to the Accelerator Pedal (AP) assembly.
The diagnostic condition is typically:
- AP Supply Voltage above Normal (232 03).
- AP Supply Voltage below Normal (232 04).
Voltage is supplied to the AP through the 21-pin connector attached to the PLD-MR and the 18-pin connector attached to the DDEC-VCU. See Figure “Location of DDEC-VCU and Wiring Harness Connectors” for connector locations within the vehicle and see Figure “DDEC-VCU Connectors” for connector positions on the DDEC-VCU.
| 1. Passenger-Side Dash | 4. 18-Pin Connector |
| 2. DDEC-VCU | 5. 21-Pin Connector |
| 3. 15-Pin Connector | |
Figure 1. Location of DDEC-VCU and Wiring Harness Connectors
| 1. 21-Pin DDEC-VCU Connector (VC1) | 3. 15-Pin DDEC-VCU Connector (VC4) |
| 2. 18-Pin DDEC-VCU Connector (VC3) | 4. DDEC-VCU |
Figure 2. DDEC-VCU Connectors
