Description of SID 254 – DDEC-VCU Fault SID 254 indicates that a fault has occurred in the DDEC-VCU. This diagnostic condition is typically: …
Troubleshooting SID 248 The following procedure will troubleshoot SID 248. 248 02 – Proprietary Datalink Fault Perform the following steps to troubleshoot a proprietary datalink…
Troubleshooting SID 254 The following procedure will troubleshoot SID 254. 254 12 – DDEC-VCU Internal Error Perform the following steps to troubleshoot 254 12, DDEC-VCU…
The following troubleshooting chart resolves erratic performance and no codes displayed. For troubleshooting procedures, refer to the appropriate engine service manual. Cannot get full power.…
The following procedures will diagnose engine cranks but will not start. Check Engine Light Perform the following steps to check the CEL: 1. Turn ignition…
SAE faults and flashcodes withdescriptions, sortedby SID, are listed in Table 5-3.
SAE faults and flashcodes with descriptions,sorted by PID, are listed in Table 5-2.
To read codes, use the diagnostic data reader or depress and hold the diagnostic request switch with the ignition ON, engine at idle or not…
The Electronic Foot Pedal Assembly (EFPA) contains the Throttle Position Sensor (TPS) that converts the hand throttle and/or foot pedal input from the operator into…
An Ambient ATS Kit (P/N: 23524171) is available through the Canton Parts Distribution Center. The Kit contains all the necessary hardware to install an Ambient…