Series 60 Air Separator System

The breather system consists of an air separator assembly mounted to the inlet side of the turbocharger, along with an oil drain tube(s), check valve(s), required breather piping and mounting hardware.

The system performs three functions: ‪

  • Collects the crankcase vapors normally emitted to atmosphere and separates particles of oil from the vapors. Any oil collected in this manner drains back to the crankcase, while the remaining fumes are mixed with the turbocharger air flow. This system virtually eliminates crankcase fumes from the engine room.
  • Filters the outside air entering the turbocharger. The oil-coated filter element removes dirt and salt particles from the incoming air.
  • Serves as an air silencer to reduce air induction noise.

1. Turbine Housing ‪ 3. Air Separator Assembly ‪
2. Compressor Housing ‪

Leave a Reply

Your email address will not be published. Required fields are marked *