The cranking motor is bolted to the flywheel housing.
Related Posts
- Series 60 Cranking Motor Parts
When the cranking circuit is closed, a drive pinion on the armature shaft engages with the teeth on the engine…
- Series 60 Cranking Circuit
The cranking circuit may contain a key start switch or push switch (or both), a relay, magnetic switches, solenoids, oil…
- Series 60 Oil Pump Mounting
The gear-type oil pump is mounted to the cylinder block and is gear driven from the front end of the…
- Series 60 Water Pump Mounting
The centrifugal-type water pump circulates the engine coolant through the cooling system. The pump is mounted on the rear…
- Series 60 Low Cranking Speed
To determine if low cranking speed is causing starting difficulty, perform the following steps: Install a tachometer to the…
