Series 60 Oil Pump Mounting

The gear-type oil pump is mounted to the cylinder block and is gear driven from the front end of the crankshaft.

Series 60 Water Pump Mounting
The centrifugal-type water pump circulates the engine coolant through the cooling system. ‪ The pump is mounted on the rear…
Series 60 Lubricating Oil Pump Parts
The drive gear is pressed on the drive shaft, which is supported inside the housing on two bushings. The driven…
Series 60 External Oil Leaks
To determine if oil leaks are causing excessive oil consumption, perform the following: 1. Start and run the engine to…
Series 60 Leaking Oil Cooler
To determine if a leaking oil cooler core is causing excessive oil consumption, perform the following: ‪ 1. Check for…
Series 60 Oil Pan Assembly
The oil pan used on the Series 60 engine is made of plastic (epoxy vinyl ester) or aluminum. For engines…

Published by sam