Detroit Diesel Troubleshooting Diagrams

Archive for the ‘Fuel Processor’ tag

Series 60 Sea Pro 152 Fuel Processor System

without comments

The Sea Pro ® 152 diesel fuel processor system is used in place of a separate spin-on primary fuel filter. This system uses a high efficiency five-micron fuel filter element which requires replacement when the fuel level in the see-thru filter cover reaches the top of the element or after one year of service, whichever comes first. ‪

The Sea Pro 152 diesel fuel processor system consists of the following: ‪

  • A permanently mounted fuel processor
  • A replaceable five-micron filter element and sealing grommet assembly
  • A filter spring
  • A see-thru filter cover and O-ring seal
  • A cover-locking retainer collar/deflector
  • A cover vent cap and seal
  • An electric fuel primer pump
  • Fuel inlet and outlet valves
  • A see-thru water filter bowl and collar assembly

Series 60 Sea Pro 152 Fuel Processor System Series 60 Sea Pro 152 Fuel Processor System

Written by sam

September 26th, 2011 at 5:55 am

Posted in Fuel System

Tagged with ,

Series 60 Sea Pro 300 Fuel Processor System

without comments

The Sea Pro ® 300 diesel fuel processor system consists of two primary fuel processor assemblies secured to a mounting plate with four U-bolts, washers, and nuts. Each processor assembly consists of a replaceable spin-on filter element assembly with a vent cap, seal ring, and reusable element splash guard. Each processor also has a water-in-fuel (WIF) switch that requires an optional module for activation.

1. Drain Valves ‪ 4. Mounting Plate ‪
2. U-bolts ‪ 5. Fuel Inlet Valve ‪
3. Fuel Outlet Valve ‪

Series 60 Sea Pro 300 Fuel Processor System Series 60 Sea Pro 300 Fuel Processor System

Written by sam

September 26th, 2011 at 5:38 am

Posted in Fuel System

Tagged with ,

Series 60 Fuel Pro 380E Fuel Processor Assembly

with one comment

The Fuel Pro ® 380/380E diesel fuel filter system is used in place of a separate spin-on primary fuel filter.  This system uses a high efficiency five-micron fuel filter element which requires replacement when the fuel level in the see-through filter cover reaches the top of the element or after one year of service, whichever comes first. ‪

The Fuel Pro 380/380E diesel fuel filter system consists of the following: ‪

  • A permanently mounted fuel processor
  • A replaceable five-micron filter element and sealing grommet assembly
  • A filter spring
  • A see-through filter cover and O-ring seal
  • A cover locking collar
  • A cover vent cap and seal

The Fuel Pro 380E system also includes the following: ‪

  • A fuel heater element
  • A thermostat switch
  • A wiring harness
1. Collar ‪ 7. Filter Element ‪
2. Vent Cap ‪ 8. Filter Seal Grommet (Part of Element) ‪
3. Vent Cap Seal ‪ 9. Wiring Harness (380E System Only) ‪
4. Spring (Part of Cover) ‪ 10. Check Valve and Thermostat ‪
5. Cover ‪ 11. Fuel Processor Assembly ‪
6. Cover Seal ‪ 12. Drain Valve

Series 60 Fuel Pro 380E Fuel Processor Assembly Series 60 Fuel Pro 380E Fuel Processor Assembly

Written by sam

September 26th, 2011 at 5:32 am

Posted in Fuel System

Tagged with ,