Check as follows: Verify that the engine will bar over by hand. If not, check for internal engine damage. Refer to “2.4 Internal Engine Damage” . If…
Check as follows: Check OEM guidelines to determine the amount of fuel in fuel tank. If fuel is at recommended level, check for a weak…
Check as follows: Check the restriction gauge. If the gauge show restriction, go to step 3 . If the reading is ok, go to the next step.…
Complete all other inspections (i.e. battery checks) prior to completing the tasks below. Use DDDL7.0 (latest version) to check for stored or active codes and…
Check as follows: Clean the engine. Start and run the engine to operating temperature 88°C (190°F). Check for leaks at oil lines, connections, mating joints,…
Check as follows: Check first for external oil leaks. Refer to “4.2 External Oil Leaks” . If no external leaks are found, go to the next step.…
Check as follows: PERSONAL INJURY To avoid injury before starting and running the engine, ensure the vehicle is parked on a level surface, parking brake…
Check as follows: Perform a crankcase pressure test and record the test results using the following: Crankcase pressure — Full load, maximum in. H2 O operating…
Check as follows: Check the restriction gauge. If the gauge show restriction, go to step 3 . If the reading is ok, go to the next step.…
Check as follows: Acquire a fuel sample from the vehicle fuel tank(s). Submit fuel sample for an ASTM test analysis. If the fuel meets specifications,…